Pump Plunger Assemblies
MSC Simpson Pressure Washer Pump Kit, Fixed, 2400 psi, Metal
This pump kit is designed for cold water gas pressure washers. It features a fixed configuration, capable of delivering a maximum pressure of 2400 psi, and is constructed from durable metal. The kit has an overall length of 9 inches and utilizes a GHT thread type.
- Accessory type: pump kit
- For use with cold water gas pressure washers
- Material: metal
- Overall length: 9.0000 in
- Maximum pressure: 2400.0 psi
- Thread type: GHT
- Connection type: male
AVANTOR MASTERFLEX (VWR LLC) DRIVE MFLEX L/S 600R SS PROF
Masterflex L/S MasterSense™ Drive with Profibus and MasterflexLive, Stainless Steel Housing, 0.1 to 600 rpm; 115/230 VAC, Avantor
AVANTOR MASTERFLEX (VWR LLC) DRIVE MFLEX L/S 600R SS E/IP
Masterflex L/S MasterSense™ Drive with EtherNet/IP and MasterflexLive, Stainless Steel Housing, 0.1 to 600 rpm; 115/230 VAC, Avantor
Chemglass Life Sciences 1" ID Vacuum Hose, 36" Long
Replacement vacuum hose for the Airfree Portable Vacuum System. 1" ID Vacuum Hose, 36" Long.
World Precision Instrument Affordable High Performance Peristaltic Pump-PERIPRO-8LS
Peri-Star Pro peristaltic pumps provide accurate and precise pumping with convenience and versatility. Peri-Star Pro can be run in either flow rate mode (mL/min) or rotation speed mode (rpm). For good laboratory practice, pumps must be calibrated after changing the tubing and solution. You can easily calibrate Peri-Star Pro to deliver flow as accurate as 0.5% in a wide flow range from 0.1 - 280 mL/min. Under rotation speed mode, the digitally controlled stepping motor provides accurate and reproducible operation with 0.1% rpm both forward and in reverse.
World Precision Instrument Pump, Aladdin, High Pressure, 200 Lbs
A high-pressure syringe pump like WPI's Aladdin Single-Syringe Pump is often used in research where precise, controlled delivery of fluids at elevated pressures is required. High-pressure syringe pumps can be used in chemical synthesis processes requiring precise control over the addition of reagents. This is especially important in reactions that occur under high pressures, such as certain types of catalytic reactions or polymerization processes. High-pressure syringe pumps can be utilized in biological and biochemical research for controlled delivery of solutions, such as high-pressure cell lysis, protein folding studies, or studies involving high-pressure biophysical techniques. Researchers studying catalysis, especially those focusing on heterogeneous catalysis, may use high-pressure syringe pumps to deliver reactants at controlled rates and pressures.
World Precision Instrument Aladdin Pump Footswitch
For use with the Aladdin Programmable Syringe Pump.
Grainger Black Pipe Nipple Threaded 1/2x1-1/8 In
The Beck Nipple is a black anodized steel nipple fitting with National Pipe Thread (NPT) connections. It has a standard weight wall and is made from ASTM A53 carbon steel. This nipple has 1/2 inch NPT straight thread connections and is 2 inches in length. It can be used to connect and extend threaded pipe. The maximum pressure rating is 6000 psi at 100°F. This nipple fitting is manufactured in the USA by Beck Manufacturing in accordance with ANSI standards. It weighs approximately 0.22 lbs.
Grainger Black Pipe Nipple Threaded 1/2x2 In
The Grainger Approved Black Pipe Nipple is made from carbon steel and has National Pipe Thread ends. It is available in sizes ranging from 1/8 inch to 2 inches diameter, and lengths from 1 inch to 12 inches. The nipple has a working pressure of 850 PSI at 70°F. It conforms to ASTM A733 and is for use in general purpose air, water, oil, natural gas and steam applications. The nipple is zinc coated for corrosion resistance.
Grainger Black Pipe Nipple Threaded 1/2x2-1/2 In
The 1/2" x 2-1/2" Black Pipe Nipple is a threaded pipe fitting made from malleable iron. It has National Pipe Thread ends and is 2-1/2" long. This nipple allows you to extend threaded pipe. It is rated for 300 psi working pressure and has a temperature range of -20°F to 300°F. The nipple has a black finish to resist corrosion. It conforms to ASME B16.3 and ASTM A197 standards. This threaded pipe fitting can be used in steam, water, air and oil applications.
Grainger Black Pipe Nipple Threaded 1/2x4 In
The Grainger 14J782 is a Westward brand 1/4-inch drive socket set. This 108-piece socket set includes both SAE and metric sockets ranging from 1/4 inch drive to 3/4 inch drive in shallow, deep, and universal joint configurations. The set is made from chrome vanadium steel and comes packed in a sturdy plastic blow mold case for storage and organization. This socket set is ideal for automotive and machinery repair and maintenance.